his series product is IEEE802.3 Ethernet media converter. Can achieve 2 10/100/1000 Base-T twisted-pair and 1000 Base-X media conversion or extension of the network transmission distance. Mainly used in optical fiber network (20/40/60/80/120km) over a long distance transmission. Fully supports 10/100/1000M or 10M, 100M, 1000M transmission rate. Optical and electrical ports can operate at 10M, 100M or 1000M transmission rate application. The device provides 2 UTP port and 8 1000Base-X ports, The equipment consists of link type/loop network, Easy to save fiber resources.
Features
●Automatically adapt to the 10Mbps, 100Mbps and the 1000Mbps environment, convenient for network upgrade;
●The device provides 2 copper ports, 8 gigabit optical ports;
●Ethernet port priority settings;
●Support half-duplex and full-duplex communication network, with automatic negotiation ability;;
●Support transmission long VLAN packets, and can support IEEE802.10 protocol
switch products matching use, support a maximum of 1916 bytes of the Ethernet packet;
●Support twisted port cross connect switch selection, Facilitate system debugging and installation;
●Low-power consumption, low fever, able to long time stability work;
●Selection of a single and double core optical fiber, expanded needs of users;
●Ethernet port supports AUTO-MDIX (cross line and straight line adaptive);
●Ethernet monitoring automatic reset function, not crash;
●Be able to detect when the optical signal is lost for the end of the device is powered down or fiber barrier, and through the indicator alarm;
●In this side view with remote device working status display function;
●No relay transmission distance up to 2~120 kilometers;
●Multiple power mode options: AC220V, DC +5 V;
●Support desktop, wall hanging;
Technical specifications
●Optical Interface
Wavelength: Single mode 1310nm/1550nm;
Multi-mode 850nm/1310nm (optional, when ordering should request)
Fiber Count: Send and receive via duplex, send and receive a simplex (optional, when ordering should request)
Transmission power: -9dBm∽-5dBm
Transmission distance: Single mode 20km,40km,60km,80km,100km,120km
Multi-mode 550m
Receive Sensitivity: Better than-36dBm (BER<10-11)
Connector: SC/FC/ST/LC (optional, when ordering should request)
●Ethernet interface: (10/100/1000M)
Rate: 10/100/1000M adaptive, full / half duplex full adaptive
Protocol: Supports IEEE 802.3 and IEEE 802.1 Q (VLAN)
Backplane bandwidth: 20Gbps
MAC address table: Can learn 4096 MAC addresses
Physical Interface: RJ45, Auto-MDIX (adaptive crossover / straight line)
Connector: RJ45
●Power requirements:
System Power: AC180V ~ 260V; DC+5V;
Power dissipation: ≤5W
●Size
Desktop: 215 (L) x135 (W) x 30mm (H)
Housing: IP30 protection grade, fanless design
●Work Environment
Operating Temperature: -10℃~~50℃
Operating Humidity: 5%~95%(No condensation)
Storage Temperature: -40℃∽80℃
Storage humidity: 5%∽95%(No condensation)
●LED
LED
|
Function
|
GX1-GX8
|
GX Los
|
Fiber port LED
ON:Fiber connection abnormal
Flash: Fiber connection normal
OFF: Fiber disconnected and have data Transmission or receive
|
GE1~GE2
|
LINK/ACT
|
Up Down
OFF ON: speed is 1000M
OFF Flash: have data transmitting
ON ON: speed is 10M
Flash OFF:have data transmitting
OFF OFF: disconnected
|
PWR
|
Green LED for power
ON: power supply normal
OFF: power supply failure
|
Package
- 8x100/1000-SFP+2x10/100/1000T Fiber Ethernet switch
- DC 5V/3A power adaptor
- Product manual
- Warranty card