Product Description

Overview

HD series video Digital Optical Converter adopt the advanced international digital video and optical fiber transmission technology, and implement the transmission of real-time & synchronization, no-distortion and high quality video effect, which can meet the user’s requirement; the play-and-plug design makes the installation more convenient and easier, and it is unnecessary to implement the spot adjustment.

Its optical module and core circuit adopt the imported components that have high stability, and all optical & electrical interfaces conform to the international standards, which is applied to the different working environment. This optical transceiver with video status indication can monitor the normal operation of system. 

Features

Ø Card type or independent structure, which is applied to centralized management 4U framework

Ø 8-bit digital code and non-compression type video transmission

Ø Support any high-resolution video signal

Ø 5Hz-10MHz video channel

Ø Automatic compatible PAL, NTSC and SECAM video system

Ø With APC circuit, constant input optical power, and large dynamic range

Ø Kilomega optical fiber transmission, large capacity, and easy to upgrade

Ø Power supply and other parameter state indication, which can monitor the operation condition of system

Ø Support no-damage regenerative trunk of video

Ø Advanced self-adapting technology, and it is unnecessary to implement the adjustment of spot electrics or optics when using

Ø Industry-grade design and modularization design make the equipment reliable and flexible

Ø Can automatically restore the fuse of power supply

Ø Full built-in power supply, and the appearance design of shell is unique.

 

 

Technical Indexes

Parameter	Specifications
Video
Video interface number	1 channel video
Bandwidth of video	8MHz
Video input & output impedance	75 Ω (imbalance) , BNC
Video input & output voltage	1Vpp
Differential gain	DG <1% ( typical value)
Differential phase	DP <0.6° ( typical value)
Weighted signal-to-noise ratio	S/N ≥ 67dB （Weighted）
Data
Physical interface	The industry standard connecting terminal
Interface Signal	RS485/RS422/RS232/Manchester
Code rat	0-400Kbps
BER	< 10 -9
Audio
Interface port	lotus block industrial standard port
Audio input/output impedance	600Ω(balance/imbalance)
Audio input/output voltage	2Vpp (typical value)
Audio input/output level	0 dbm (typical value)
Audio bandwidth	10Hz~20kHz
Audio digital bandwidth	24 bit
Audio signal-to-noise ratio	S/N ≥95Db ( weighted)
Ethernet
Physical interface	RJ45
Operating mode	Full duplex / half duplex
Operating mode	Full duplex/ full-duplex
Support agreement	IEEE802.3、10M、10/100M adaptive
Phone
Physical interface	RJ11
Voice bandwidth	8kHz
Special function	Support the call display，With hands-free function
Working mode	Point to point link， SPC Exchanges method
Optical
Connector	FC/ST (optional)
Fiber type	single-mode fiber, single fiber
Transmission distance	single mode 20Km
Environmental demand
environmental temperature	-30℃～+75℃
Storage environment	-40℃～+85℃
Relative humidity	0-95% ( no condensation)
Power supply voltage	AC220V/50Hz
Dimensions	10.8*10.6*2.7（cm）

 

 

Ordering information

 

Model Number	Product Configuration	Fiber Interface	Fiber Mode	Wavelengths	Maximum Transmission Distance
HD-M1V-T/RF	1 Channel Video	FC/SC/ST	Multi-mode	1310/1550 nm	2Km
HD-S1V-T/RF	1 Channel Video	FC/SC/ST	Single-mode	1310/1550 nm	20Km
HD-S1V-T/RF	1 Channel Video	FC/SC/ST	Single-mode	1310/1550 nm	40Km
HD-M1V↑1D↓3-T/RF	1 Channel Video 1 Channel Data	FC/SC/ST	Single-mode	1310/1550 nm	2Km
HD-S1V↑1D↓3-T/RF	1 Channel Video 1 Channel Data	FC/SC/ST	Single-mode	1310/1550 nm	20Km
HD-S1V↑1D↓3-T/RF	1 Channel Video 1 Channel Data	FC/SC/ST	Single-mode	1310/1550 nm	40Km

 

 

Remark: To meet the needs of our customers and help them to realize their projects, we also can manufacture the products according to customers' requirements.

 

Warranty: on-artificial damage, a year replacement, three years warranty.

 

 

 

Payment Terms︰ TT

Product Image